RANCANG BANGUN DAPUR CRUCIBLE TIPE PENUANGAN TUNGKIK KAPASITAS 15 KG DENGAN BAHAN BAKAR GAS LPG
Abstract views: 435
,
PDF downloads: 310
Abstract
15 kg; 2) Conducting the test of chemical composition of the first and second melting result. The
research used field and library research. From the result of the design, it could be obtained that the
dimension of melting casting has 547 mm diameter, 3 mm thick, 410 mm high. Whereas, molten cup has 178 mm diameter, 8 mm thick, and 230 mm high. The result of the first melting chemical
composition test and the second one do not work out a significant change. The material of the first
melting result still contains 89,52% of aluminium (Al), while the main fusion is 7,71% of zinc (Zn)
and 1,84% of silicon (Si), and in the second melting result still contains 89,55% of Alumunium (Al),
while the main fusion is 7,51% of zinc (Zn) and 1,94% of silicon (Si).
References
Akuan, A., 2009. “Tungku Peleburan Logam”, Universitas Jendral Ahmad Yani, Bandung.
Sudjana, H., 2008, Teknik Pengecoran Logam, Departemen Pendidikan Nasional, Jakarta.
Hill, R., C., 1979, “Design, Construction and Performance of Stick-Wood Fire Furnace for Residental and Commercial Application” University of Maine Orono, Maine, pp. 1- 7.
Mubarak, A., Z., dan Akhyar, 2013,"Perancangan dan Pembuatan Dapur Peleburan Logam dengan Menggunakan Bahan Bakar Gas (LPG)" Jurnal Teknik Mesin Unsyiah, Vol.
, No. 3 Juni 2013 pp. 128-132.
Arianto, L.S. Dkk, 2014, “Tungku Pelebur Alumnium Dengan Economizer” Universitas Negeri Yogyakarta.
} John R. Brown,. 1994, Feseco Non-Ferrous Foundryman’s Handbook Eleventh edition Revised and edited.
Totten, George. E, 1999, Handbook of Aluminium, Vol. 1, Marcel Dekker, New York, Bassel.
Inayah Fatwa Kurnia Dewi, 2009, “Pemanfaatan Gas” Universitas Indonesia, Jakarta.
Darmawan, H, 2004. Pengantar PerancanganTeknik (Perancangan Produk). Bandung.
Suhandri E., 2011, “Rancang Bangun Dapur Peleburan Alumunium Bahan Bakar Gas”, Politeknik Negeri Sriwijaya, Palembang.
Copyright (c) 2018 Infotekmesin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
