Distribusi Medan Listrik di Kompartemen Busbar Gas Insulated Switchgear (GIS) Menggunakan Charge Simulation Method
Abstract views: 289
,
PDF downloads: 204
Abstract
Penelitian ini bertujuan untuk mengilustrasikan distribusi medan listrik di kompartemen busbar tipe gas insulated switchgear (GIS). Gas Insulated Substation (GIS) merupakan rangkaian peralatan gardu induk yang terpasang di dalam sebuah metal enclosure dan diisolasi oleh gas bertekanan yaitu Sulfur Hexafluoride (SF6). Dalam simulasi ini, diasumsikan titik referensi berada di sekitar contact pin busbar, dan titik muatan buatan berada disekitar kompartemen busbar. Simulasi dilakukan dengan menentukan titik referensi dan titik muatan bantuan untuk menghitung nilai muatan yang akan dicari yaitu contact pin. Titik muatan buatan ini terletak disembarang titik disekitar kompartemen busbar GIS dan akan dihitung nilai muatannya melalui metode simulasi muatan (charge simulation method) dengan bantuan komputasi Matlab
References
Y.Gao,Z.Li,H.Wang,danX.Yuan,“Metalparticleencouragedsurfacechargeaccumulationonepoxyinsulatorwithmulti-arcsurfaceprofileunderDCvoltage,”IEEETrans.Dielectr.Electr.Insul.,vol.27,no.3,hal.998–1006,2020,doi:10.1109/TDEI.2019.008634.[2]N.Hayakawa,R.Oishi,H.Kojima,K.Kato,danN.Zebouchi,“ElectricFieldGradingbyFunctionallyGradedMaterials(FGM)forHVDCGasInsulatedPowerApparatus,”Annu.Rep.-Conf.Electr.Insul.Dielectr.Phenomena,CEIDP,vol.2018-October,hal.309–312,2018,doi:10.1109/CEIDP.2018.8544834.[3]C.Cavallaro,S.Musumeci,F.Chimento,danC.Santonocito,“CADinvestigationofvoltagepotentialandelectricalfielddistributionon36kVloadbreakswitch,”Proc.Univ.PowerEng.Conf.,hal.879–884,2007,doi:10.1109/UPEC.2007.4469065.[4]H.Wang,Z.Peng,N.Li,S.Zhang,Z.Guo,danS.Zhang,“TransientelectricfieldcalculationofUHVGISspacerunderlightningimpulse,”2014IEEEConf.Electr.Insul.Dielectr.Phenomena,CEIDP2014,no.1,hal.542–545,2014,doi:10.1109/CEIDP.2014.6995731.[5]H.J.Ju,B.Kim,danK.C.Ko,“Optimaldesignofanellipticallygradedpermittivityspacerconfigurationingasinsulatedswitchgear,”IEEETrans.Dielectr.Electr.Insul.,vol.18,no.4,hal.1268–1273,2011,doi:10.1109/TDEI.2011.5976126.[6]X.Zhang,F.Meng,danB.Yang,“Useofhydroxyl-modifiedcarbonnanotubesfordetectingSF6decompositionproductsunderpartialdischargeingasinsulatedswitchgear,”IEEETrans.Dielectr.Electr.Insul.,vol.20,no.6,hal.2246–2253,2013,doi:10.1109/TDEI.2013.6678876.[7]H.J.Ju,B.S.Kim,H.D.Hwang,S.K.Jo,danK.C.Ko,“Investigationofsimplegradedpermittivitysolidspacershapebyelectrodemodificationongasinsulatedswitchgear,”Proc.2010IEEEInt.PowerModul.HighVolt.Conf.IPMHVC2010,hal.434–438,2010,doi:10.1109/IPMHVC.2010.5958387.[8]U.Khayam,“Locusandpatternofelectricfieldvectorintheinsulationofthree-phasegasinsulatedswitchgear,”2012Int.Conf.PowerEng.Renew.Energy,ICPERE2012,no.July,hal.3–6,2012,doi:10.1109/ICPERE.2012.6287226.[9]G.A.Madarász,B.H.Choi,danJ.Y.Lee,“Applicationofdry-airinsulatingmediain170kVGIS,”2011Electr.Insul.Conf.EIC2011,vol.7874,no.June,hal.128–131,2011,doi:10.1109/EIC.2011.5996131.[10]H.Zhouetal.,“ReviewofchargeaccumulationonspacersofgasinsulatedequipmentatDCstress,”CSEEJ.PowerEnergySyst.,vol.6,no.3,hal.496–517,2020,doi:10.17775/CSEEJPES.2019.00820.[11]U.Khayam,“Locusandpatternofelectricfieldvectorintheinsulationofthree-phasegasinsulatedswitchgear,”2012Int.Conf.PowerEng.Renew.Energy,ICPERE2012,no.July,hal.3–6,2012,doi:10.1109/ICPERE.2012.6287226.[12]H.Zhouetal.,“ReviewofchargeaccumulationonspacersofgasinsulatedequipmentatDCstress,”CSEEJ.PowerEnergySyst.,vol.6,no.3,hal.496–517,2020,doi:10.17775/CSEEJPES.2019.00820.[13]M.T.UddindanU.Khayam,“Threedimensionalanalysisofrotatingelectricfieldinthree-phasegasinsulatedswitchgear,”Proc.-5thInt.Conf.Electr.Eng.InformaticsBridg.Knowl.betweenAcad.Ind.Community,ICEEI2015,hal.206–212,2015,doi:10.1109/ICEEI.2015.7352497.[14]X.Zhang,F.Meng,danB.Yang,“Useofhydroxyl-modifiedcarbonnanotubesfordetectingSF6decompositionproductsunderpartialdischargeingasinsulatedswitchgear,”IEEETrans.Dielectr.Electr.Insul.,vol.20,no.6,hal.2246–2253,2013,doi:10.1109/TDEI.2013.6678876.
Copyright (c) 2020 Electronica and Electrical Journal of Innovation Technology (E-JOINT)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
