Pengaruh Sudut Sudu Turbin Jenis Taper Terhadap Tip Speed Ratio (TSR) dan Power Coefficient (CP) pada Turbin Angin Horisontal Berbasis Q-Blade

  • Roy Aries Permana Tarigan Politeknik Negeri Cilacap
  • Radhi Ariawan Politeknik Negeri Cilacap
  • Adam Jauza Maulana Politeknik Negeri Cilacap
  • Wais Al Khorni Politeknik Negeri Cilacap
Abstract views: 28 , pdf downloads: 41

Abstract

The utilization of wind energy as a power plant still needs to be improved by looking at the turbine
performance, which is not always the same in different regional conditions. This study aims to determine the effect
of the blade angle of the turbine on the tip speed ratio (TSR) and power coefficient (CP) by using a Q-Blade
simulation. Q-Blade software can predict the value of the power generated at the blade rotation by comparing the
CP and TSR values. The type of airfoil NACA 4412, taper blade, blade's numbers (4), blade radius (0.3 m), wind
speed ± 3.6 m/s were fixed variables in this study. The simulation generated a graph of the relationship between
CP and TSR changed and a simulation image of the load distribution ensued in the blade geometry. The blade
angle of 30 at the TSR number 5 produced the highest CP values, which was ±0.4. The low loading value in the
axis/rotor region, at a variation of the blade angle of 30, balances the centrifugal force on the rotating fluid. The
centrifugal force produces thrust on the turbine so that the blade rotates with a high CP value in that area.

PlumX Metrics

Published
2022-04-30
Section
Articles