Pengaruh Sudut Sudu Turbin Jenis Taper Terhadap Tip Speed Ratio (TSR) dan Power Coefficient (CP) pada Turbin Angin Horisontal Berbasis Q-Blade
Abstrak views: 274
,
pdf (English) downloads: 340
Abstrak
The utilization of wind energy as a power plant still needs to be improved by looking at the turbine
performance, which is not always the same in different regional conditions. This study aims to determine the effect
of the blade angle of the turbine on the tip speed ratio (TSR) and power coefficient (CP) by using a Q-Blade
simulation. Q-Blade software can predict the value of the power generated at the blade rotation by comparing the
CP and TSR values. The type of airfoil NACA 4412, taper blade, blade's numbers (4), blade radius (0.3 m), wind
speed ± 3.6 m/s were fixed variables in this study. The simulation generated a graph of the relationship between
CP and TSR changed and a simulation image of the load distribution ensued in the blade geometry. The blade
angle of 30 at the TSR number 5 produced the highest CP values, which was ±0.4. The low loading value in the
axis/rotor region, at a variation of the blade angle of 30, balances the centrifugal force on the rotating fluid. The
centrifugal force produces thrust on the turbine so that the blade rotates with a high CP value in that area.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
