Desain dan Perancangan Alat Welding Holder untuk Pengelasan Pelat pada Las GMAW
Abstract views: 476
,
pdf downloads: 445
Abstract
One of the metal welding processes required by the manufacturing industry is gas arc welding (GMAW). The welding process that is capable of transmitting large amounts of heat at high speeds is gas electric welding or GMAW (Gas Metal Arc Welding). The design mechanism for the movement of the X and Y axes in the development of GMAW welding holders uses the stages of finding ideas, studying literature, identifying problems, designing, making tools and testing machines. The purpose of this study was to design a mechanism for moving the X and Y axes in the development of an automatic GMAW torch holder machine and to calculate the machine elements in the development of an automatic GMAW torch holder machine.
The process of designing and constructing the movement of the X and Y axes in the development of an automatic GMAW welding torch holder machine is carried out with a design procedure that is used as a reference in solving problems. The track shaft uses chrome steel with a diameter of 25 mm and a length of 800 mm, Linear bearings use type SCS25UU with an inner diameter of 25 mm, Linear rail shafts use aluminum alloy material with a diameter of 25 mm which is used to support the end of the track shaft, Ballscrew uses the SFU 2005 type with a size of 3/4 inch which is equipped with a ballscrew nut and also a nut housing, Bearing block uses a UCP type with a diameter of 20 mm, Flexible coupling measuring 5 mm to 10 mm is used to connect the drive screw with the stepper motor, The stepper motor is used as the main power to drive the drive screw type Nema 17 (17HD48002H-22B) with the specifications Step Angle: 1.8o, Rated Current: 1.5 Ampere, Voltage : 2.7V.
Copyright (c) 2023 Accurate: Journal of Mechanical Engineering and Science
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
