Analisis Lifetime Dan Kerusakan Rear Leaf Spring Truk Iveco AD 410 Untuk Meningkatkan Ketepatan Perencanaan Penggantian
Abstract views: 200
,
PDF downloads: 193
Abstract
Components in a unit have a certain lifetime, therefore maintenance and rejuvenation are needed to maintain performance, including leaf springs. The rear leaf spring component replacement of the Iveco AD 410 truck unit in the MIFA Project was not conducted as scheduled. The purpose of this study is to improve the planning accuracy of the rear leaf spring component replacement for the Iveco AD 410 truck on the MIFA Project. The methods used in this study were qualitative and comparative quantitative method and also reliability centered spares using the normal distribution processing method. The test data used were work order data for 2018-2020 and replacement recommendation data from the manufacturer. The results of the analysis of this study indicate that the average lifetime of the rear leaf spring component is shorter than the recommended lifetime from the manufacturer with 18% decrease in component efficiency. This is caused by extreme road conditions and the lack of maximum maintenance on the leaf spring components.
References
B.Liu,Z.Ji,T.Wang,Z.Tang,andG.Li,“Failureidentificationofdumptrucksuspensionbasedonanaveragecorrelationstochasticsubspaceidentificationalgorithm,”Appl.Sci.,vol.8,no.10,2018,doi:10.3390/app8101795.[2]Basori,Asmawi,andT.Pasaribu,“AnalisisKegagalanPegasDaunKendaraanBusDenganKapasitas7Ton,”Progr.Stud.Tek.MesinUniv.Nas.,vol.1,no.April,pp.13–21,2019.[3]F.Wahyu,S.Atmawan,E.Muthoriq,andH.M.K,“AnalisisKekuatanSuspensiPegasDaunTrukDenganMetodeFiniteElement,”PoliteknologiVol.14No.3Sept.2015,vol.14,no.3,pp.1–8,2015.[4]A.SupriyantoandMuhammadVendyhermawan,“SimulasiNumerikPenambahanSlotPerDaunTerhadapKekuatanStatikKendaraanNiaga,”J.SuryaTek.,vol.7,no.2,pp.141–146,2020,doi:10.37859/jst.v7i2.2289.[5]J.SialanaandM.Bunai,“AnalisaSistemSuspensiDanKekuatanPegasDaun(LeafSpring)PadaMobilMitsubishiFuso125Ps,”J.Tek.MESIN,vol.7,no.1,pp.19–31,2018.[6]J.M.Tupan,B.J.Camerling,andM.Amin,“PenentuanJadwalPerawatanKomponenKritisPadaMesinMTU12V2000G65DIPLTDTersebarPTPLN(PERSERO)AreaTual(StudiKasus:PLTDWonreli),”Arika,vol.13,no.1,pp.33–48,2019,doi:10.30598/arika.2019.13.1.33.[7]F.T.D.AtmajiandA.A.N.N.U.Putra,“SparePartInventoryPolicyatABCCompanyUsingRCS(ReliabilityCenteredSpare)method,”J.Manaj.Ind.DanLogistik,vol.2,no.1,pp.90–102,2018.[8]A.P.Laksitaningtyas,D.Legono,D.Teknik,F.Teknik,andU.Gadjah,“MetodeUjiKetelitianUnjukKerjaAlatUkurDenganPenerapanPersamaanDistribusiNormal(ContohKasusLaserDopplerAnemometer),”J.Ilm.Tek.Sipil,vol.24,no.1,pp.80–89,2020.[9]M.HasyimandF.K.Andreina,“AnalisisHighOrderThinkingSkill(Hots)SiswaDalamMenyelesaikanSoalOpenEndedMatematika,”FIBONACCIJ.Pendidik.Mat.danMat.,vol.5,no.1,p.55,2019,doi:10.24853/fbc.5.1.55-64.[10]D.B.Marghitu,MechanicalEngineer’sHandbook.America:AcaAcademicPress,2001.[11]A.KusmiranandM.SaidL,“AnalisisPengaruhGayaTerhadapFatigueLifeBajaStrukturalPadaPegasDaunMenggunakanAnalisisElemenHingga,”JFTJ.Fis.danTer.,vol.6,no.2,p.103,2019,doi:10.24252/jft.v6i2.11547.[12]S.A.Sutarjo,I.Qiram,andG.Rubiono,“PengaruhJarakLendutanPadaPegasDaun(LeafSpring)AkibatPembebanan,”V-Mac,vol.4,no.2,pp.13–16,2019.[13]DinasPekerjaanUmum,PelatihanRoadDesignEngineer.Jakarta:DinasPekerjaanUmum,2005.[14]M.IbrahimandPurwanto.,“PengaruhPemanasanSebelumPengelasanTerhadapPengujianFaceDanRootBendingHasilLasSmawBajaSup9,”J.MultidicsiplinaryRes.Dev.,vol.2,no.1,pp.230–237,2019.[15]M.Hudha,“AnalisaRekondisiBajaPegasDaunBekasSUP9ADenganMetodeQuench-TemperPadaTemperaturTempering480°CTerhadapKekerasanDanKekuatanTarik,”InstitutTeknologiSepuluhNovember,2017.[16]SepfitrahandY.Rizal,“AnalisisPeristiwaKegagalanPada(LeafSpring)TrukColtDieselPengangkutPasir,”J.APTEK,vol.5,pp.151–160,2013.[17]W.Anhar,“InvestigasiPatahanSpringBoltpadaFrontLeafSpring,”JTT(JurnalTeknol.Terpadu),vol.5,no.1,p.14,2017,doi:10.32487/jtt.v5i1.205.[18]R.N.Austen,“Maintenanceengineeringofchassisleafsprings,”SAETech.Pap.,vol.53,no.1945,pp.603–606,1945,doi:10.4271/450223.
Copyright (c) 2022 Infotekmesin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
