Analisa Tensile Strength Komposit Serat Kulit Pohon Waru dengan Kombinasi Serat Karbon Kevlar Sebagai Material Reinforcement
Abstract views: 431
,
PDF downloads: 535
Abstract
In increasing the tensile strength of the waru tree bark fiber composite (Hibiscus tiliaceus), it is necessary to have a combination of reinforcement used in the composite material. One of the reinforcement materials that can be combined is carbon fiber kevlar. Kevlar carbon fiber has several advantages, including low density, absorbing vibrations well, and it is resistant to chemical solutions. The specific objectives of this study were to determine the maximum strain stress, modulus of elasticity, and fracture analysis of hibiscus bark fiber composites with a combination of kevlar carbon fiber as a reinforcement material. The independent variable in the study was comparing the composite with the different reinforcement materials used, including 100% hibiscus (Hibiscus tiliaceus) bark fiber, 100% kevlar carbon fiber, 50% combination fiber of hibiscus (Hibiscus tiliaceus) bark, and 50% kevlar carbon. The process of making composites uses the vacuum infusion resin method with specimens referring to the ASTM D638-03 type I standard. The results of this study are that combining kevlar carbon fiber as a reinforcement material can improve the mechanical properties in terms of the tensile strength of the hibiscus tree bark fiber composite.
References
W. A. Wirawan, S. A. Setyabudi, and T. D. Widodo, “Pengaruh Jenis Matrik Terhadap Sifat Tarik Pada Natural Fiber Komposit,” in SNTT, 2017, vol. 3, no. 1, pp. 2476–9983. [Online]. Available: https://prosiding.polinema.ac.id/sngbr/index.php/sntt/article/view/10
G. E. Pramono and S. P. Sutisna, “Perbandingan Karakteristik Serat Karbon Antara Metode Manual Lay-Up dan Vacuum Infusion Dengan Penggunaan Fraksi Berat Serat 60%,” AME (Aplikasi Mek. dan Energi) J. Ilm. Tek. Mesin, vol. 3, no. 1, pp. 1–6, 2017.
H. Husman, Z. Kurniawan, and Y. Aziz, “PENGARUH KOMPOSIT SERAT KARBON TERHADAP SIFAT MEKANIK DAN TOFOGRAFI PADA MATRIKS POLYESTER BQTN 157,” in Prosiding Seminar Nasional NCIET, 2020, vol. 1, no. 1, pp. 69–76.
S. M. B. Respati, H. Purwanto, and K. Hasan, “KETAHANAN KOMPOSIT RESIN-AYAMAN KULIT ECENG GONDOK (eichhornia crassipes) PADA DIMENSI UJUNG PELURU YANG BERBEDA,” CENDEKIA EKSAKTA, vol. 5, no. 1, 2020.
A. R. Fadhillah, S. Setiyabudi, and A. Purnowidodo, “Karakteristik Komposit Serat Kulit Pohon Waru (Hibiscus Tiliaceus) Berdasarkan Jenis Resin Sintetis terhadap Kekuatan Tarik dan Patahan Komposit,” J. Rekayasa Mesin, vol. 8, no. 2, pp. 101–108, 2017, doi: 10.21776/ub.jrm.2017.008.02.7.
A. R. Fadhillah, D. Hermawan, N. R. Ismail, and D. Framasta, “PENGARUH JUMLAH ALIRAN INPUT RESIN PADA PROSES VACCUM INFUSION RESIN TERHADAP BEBAN DAN WAKTU PATAH,” in Conference on Innovation and Application of Science and Technology (CIASTECH 2020), 2020, no. 3, pp. 525–532.
A. Fadhillah, “Potensi Serat Kulit Pohon Waru sebagai Material Reinforcement Komposit,” in Book Chapter Seri 2 Fakultas Teknik Universitas Widyagama Malang “Inovasi Teknologi Dalam Mendukung Pembangunan Berkelanjutan,” 2nd ed., vol. 1, no. 1, Malang: Inteligensia Media, 2021, pp. 17–28.
V. H. Hermawan, N. R.Ismail, A. Farid, and A. R. Fadhillah, “Pengaruh Penambahan Serbuk Alumina (Al203) Pada Resin Polyester Btqn 157 Terhadap Kekuatan Impact Komposit Serat Kulit Pohon Waru (Hibiscus Tiliaceus),” J. Energi dan Teknol. Manufaktur, vol. 3, no. 02, pp. 25–32, 2020, doi: 10.33795/jetm.v3i02.57.
A. R. Fadhillah, “DESAIN POLA FIBER BERBAHAN SERAT KULIT POHON WARU (HIBISCUS TILIACEUS) BERMATRIK RESIN SINTETIS TERHADAP KEKUATAN TARIK KOMPOSIT,” Universitas Brawijaya Malang, 2017.
A. R. Fadhillah, D. Hermawan, and A. R. Wardhani, “Pengaruh prosentase larutan NaOH pada proses alkalisasi serat kulit pohon waru (hibiscus tiliaceus) sebagai reinforcement komposit terhadap kekuatan tarik serat tunggal,” Turbo J. Progr. Stud. Tek. Mesin, vol. 8, no. 2, pp. 111–118, 2019, doi: 10.24127/trb.v8i2.1159.
B. A. Setyawan, M. R. Hatuwe, and M. Marsudi, “Kualitas Karaktometri Material Kevlar Substitusi Fiberglass pada Kapal Ikan Nelayan Indonesia,” J. Ilm. Giga, vol. 22, no. 1, p. 9, 2019, doi: 10.47313/jig.v22i1.738.
D. Istanta, “Analisis Pengaruh Texture Serat Terhadap Sifat Fisik Dan Mekanik Aramid Epoksi Prepreg,” Indept, vol. 3, no. 1, pp. 52–80, 2013, [Online]. Available: http://jurnal.unnur.ac.id/index.php/indept/article/view/107/80
K. N. Afifah and Subaer, “Pengembangan Komposit Seratkarbon-Geopolimer Berbasis Metakaolin Sebagai Material Refraktori,” J. Sains dan Pendidik. Fis., vol. 14, no. 1, pp. 67–73, 2018, [Online]. Available: http://ojs.unm.ac.id
L. L. A. Nisa, S. Aritonang, M. T. E. Manawan, and T. Sudiro, “Kajian Potensi Pengembangan Material Komposit Berpenguat Bahan Alam Untuk Diaplikasikan Sebagai Body Armor,” J. Teknol. Daya Gerak, vol. 5, no. 1, pp. 71–82, 2022, [Online]. Available: https://jurnalprodi.idu.ac.id/index.php/TDK/article/view/1176%0Ahttps://jurnalprodi.idu.ac.id/index.php/TDK/article/download/1176/992
I. Ismojo, R. Hafizh, and D. Suastiyanti, “Study Perbandingan Serat Jute Jawa Dengan Kevlar Sebagai Penguat Epoxy Untuk Aplikasi Helm Anti Peluru Berdasarkan Analisa Numerik,” J. Tek. Mesin ITI, vol. 4, no. 2, pp. 37–45, 2020, doi: 10.31543/jtm.v4i2.400.
A. F. Suryono, A. Faizal, and H. Hestiawan, “PENGARUH POST CURING TREATMENT DAN PERENDAMAN AIR LAUT PADA KOMPOSIT HYBRID KEVLAR/KARBON,” Rekayasa Mek., vol. 4, no. 1, pp. 13–17, 2020.
T. W. Wicaksono, A. Farid, N. R. Ismail, and A. R. Fadhillah, “Pengaruh Debit Aliran Resin Bisphenol a Lp-1Q-Ex Pada Metode Vacuum Infusion Resin Terhadap Kekuatan Tarik Komposit Serat Kulit Pohon Waru (Hibiscus Tiliaceus),” J. Energi dan Teknol. Manufaktur, vol. 4, no. 01, pp. 17–24, 2021, doi: 10.33795/jetm.v4i01.71.
D. Framasta, A. Farid, N. R. Ismail, and A. R. Fadhillah, “Pengaruh arah aliran input resin sintetis pada proses vacuum infusion resin terhadap kekuatan tarik komposit serat kulit waru (hibiscus tiliaceus),” J. Turbo, vol. 10, no. 1, pp. 1–7, 2021, doi: http://dx.doi.org/10.24127/trb.v10i1.1288.
R. Fadilah and G. Widyaputra, “Analisis Kekuatan Tarik Dan Struktur Mikro Material Komposit Pada Body Mobil Listrik Prosoe Kmhe 2019,” J. Tek. Mesin, vol. 9, no. 2, pp. 124–131, 2020, doi: 10.22441/jtm.v9i2.6199.
Copyright (c) 2023 Handry Stefan Enus Handry, Gatot Soebiyakto Gatot, Arief Rizki Fadhillah Arief, Dadang Hermawan
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
