Rancang Bangun Kwh Meter Digital Menggunakan Internet of Things
Abstract
In general, the kWh meter is installed in a distribution substation that supplies electrical energy to the building. The weakness of ordinary kWh meters cannot provide real information on electricity consumption. Measuring and recording the use of electrical energy still requires human power. By utilizing an internet network based on the Internet of Things (IoT) concept, this research aims to design and manufacture a digital kWh meter to monitor and control the use of electrical energy in buildings in real-time on a website. Using the website and the MYSQL-PHPMyAdmin Database as data storage. The PZEM-004T sensor is used to measure the electrical energy used, then it is processed on the Wemos D1 Mini microcontroller. From the test results that have been carried out, the digital Kwh meter has succeeded in monitoring and controlling the use of electrical energy through the website in real-time. Percentage average error value: voltage: 0.44% - 0.49%, current: 0.36%, cos phi leading: 39%, cos phi lagging: 1%, power: 0.93% - 2.68%, kWh: 16.3%, frequency: 0 %.
References
[2] S. A. Kartika, “ANALISIS KONSUMSI ENERGI DAN PROGRAM KONSERVASI ENERGI (STUDI KASUS: GEDUNG PERKANTORAN DAN KOMPLEKS PERUMAHAN TI),” SEBATIK, vol. 22, no. 2, pp. 41-50, 2018.
[3] D. Despa, M. A. Muhammad, A. Surinanto, A. Hamni, G. F. Nama dan Y. Martin, “Monitoring dan Manajemen Energi Listrik Gedung Laboratorium Berbasis Internet of Things (IoT),” dalam Seminar Nasional Teknik Elektro, Batu Malang, 2018.
[4] A. Sofwan, A. Muis dan S. Triatmodjo D, “ENERGY MONITOR PANEL UTAMA JARINGAN DISTRIBUSI 20KV DENGAN PENERAPAN POWERMETER BERBASIS WEBSITE,” TEKINFO : Jurnal Penelitian Teknik Dan Informatika, vol. 1, no. 1, pp. 51-62, 2019.
[5] A. Kurniawan, D. Syauqy dan B. H. Prasetio, “Pengembangan Sistem Monitoring Listrik Pada Ruangan Menggunakan NodeMCU dan MQTT,” Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, vol. 1, no. 6, pp. 486-491, 2017.
[6] L. S. Pamungkas dan N. Damastuti, “Teknologi IoT dan Arduino Guna Pemantauan Arus Dan Tegangan Listrik,” e-NARODROID, vol. 4, pp. 46-53, 2018.
[7] Andriana, Zulkarnain dan H. Baehaqi, “SISTEM kWH METER DIGITAL MENGGUNAKAN MODUL PZEM-004T,” TIARSIE, vol. 16, no. 1, pp. 29-34, 2019.
[8] I. G. P. M. Eka Putra, I. A. D. Giriantari dan L. Jasa, “Monitoring Menggunaan Daya Listrik Sebagai Implementasi Internet of Things Berbasis Wireless Sensor Network,” Teknologi Elektro, vol. 16, no. 03, pp. 50-55, 2017.
[9] D. S. Utomo, “PRODUCT PRICE DISPLAY USING WEMOS,” Fakultas Teknologi dan Informatika Institut Bisnis dan Informatika Stikom, Surabaya, 2018.
[10] F. N. Habibi, S. Setiawidayat dan M. Mukhsim , “Alat Monitoring Pemakaian Energi Listrik Berbasis Android Menggunakan Modul PZEM-004T,” dalam Seminar Nasional Teknologi Elektro Terapan 2017, Malang, 2017.
[11] I. R. Dewi dan R. Malfiany, “PERANCANGAN SISTEM INFORMASI ADMINISTRASI PEMBAYARAN PADA SDIT LAMPU IMAN KARAWANG BERBASIS VISUAL BASIC 6.0,” Interkom, vol. 12, no. 2, pp. 4-12, 2017.
[12] M. Qurniatun, S. D. Riyanto dan M. Yusuf, “Optimalisasi Daya Output Pada Photovoltaic Penggunakan Sistem Tracking dan Fuzzy Logic Controller,” Infotekmesin, vol. 14, no. 01, pp. 14-22, 2023.
[13] A. R. N, Risdayana, E. Yuliani dan Vovi, “KARAKTERISTIK ARUS DAN TEGANGAN PADA RANGKAIAN SERI DAN RANGKAIAN PARALEL DENGAN MENGGUNAKAN RESISTOR,” d’Computare, vol. 9, pp. 40-43, 2019.
[14] U. M. Rifanti, T. N. Padilah dan I. Widyaningrum, “Model Matematika Arus Listrik dengan Persamaan Diferensial Metode Koefisien Tak Tentu,” Jurnal Matematika Integratif, vol. 15, no. 1, pp. 1-8, 2019.
[15] Lisiani, A. Razikin dan Syaifurrahman, “Identifikasi dan Analisis Jenis Beban Listrik Rumah Tangga Terhadap Faktor Daya (Cos Phi),” Jurnal Teknik Elektro Universitas Tanjungpura, vol. 1, no. 1, 2020.
[16] M. Rizki, S. R. Lubis dan M. Syukri, “Studi Analisis Kompensasi Daya Reaktif dengan Motor Sinkron dan Kapasitor Bank pada PT. PDAM Tirta Daroy,” dalam Seminar Nasional dan Expo Teknik Elektro 2017, Banda Aceh, 2017.
[17] W. N. Agustianingsih, F. Kurniawan dan P. Setiawan, “Analisis Ketepatan Pengukur Daya dan Faktor Daya Listrik Berbasis Arduino Uno R3 328P,” AVITEC, vol. 3, no. 1, pp. 15-27, 2021.
Copyright (c) 2023 Rio Guntur Dany Rafi, Supriyono Supriyono, Zaenurrohman Zaenurrohman, Purwiyanto Purwiyanto
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).