Perhitungan Pengendalian Persediaan Fast Moving Spare Part Dengan Metode Min-Max Stock
Abstract views: 576
,
PDF downloads: 914
Abstract
Maintenance is an effort to maintain a heavy equipment unit to keep it in good condition. One of the techniques to maintain unit performance is by carrying out maintenance management which is a combination of various activities such as monitoring, scheduling, repairing, and inventory control. One part of maintenance management is inventory management which aims to ensure the availability of spare parts in the warehouse so that it can increase the efficiency of maintenance time. The purpose of this study is to calculate the supply of fast-moving spare parts, especially oil filters and diesel filters using the Min-Max Stock method at PT Armada Hada Graha Basecamp Kelontong. The research used a comparative quantitative method utilizing spare parts usage data from January to March 2022 and inventory stock data on March 2022. From the calculation results it can be concluded that the percentage of filter inventory between the minimum and maximum stock values is 7%. It happens due to several factors, namely, materials, methods, machines, and the environment.
References
Siregar Ninny Hj. and Munthe Sirmas, “Analisa Perawatan Mesin Digester dengan Metode Reliabity Centered Maintenance pada PTPN II Pagar Merbau,” Jime (Journal Ind. Manuf. Eng., vol. 3, no. 2, p. 89, 2019, [Online]. Available: http://ojs.uma.ac.id/index.php/jime.
B. J. Camerling, D. B. Paillin, and A. B. Dharma, “Pengaruh Manajemen Perawatan Sistem Engkol Terhadap Pengoperasian Mesin Anglo Belgian Corporation Type 12V,” Arika, vol. 14, no. 1, pp. 1–14, 2020, doi: 10.30598/arika.2020.14.1.01.
A. Prasetyo, A. A. Abdillah, and A. Syuriadi, “Manajemen Perawatan Caterpillar Forklift Dp25nd Di Workshop Alat Berat Politeknik Negeri Jakarta,” Semin. Nas. Tek. Mesin 2021, no. December, pp. 1602–1608, 2021.
A. A. Abdillah, M. T. Adigunanugraha, and I. Bianca, “Rancang Bangun Aplikasi Manajemen Gudang Suku Cadang Alat Berat PNJ,” J. Politeknologi, vol. 18, no. 3, pp. 307–314, 2019, doi: 10.32722/pt.v18i3.2397.
E. Sofia., Darno, M. O. Wiraswati, and D. A. Ningrum, “Analisa Pengendalian Persediaan Suku Cadang Pada PT. XYZ Dengan Metode Analisis ABC,” Abiwara J. Vokasi Adm. Bisnis, vol. 2, no. 1, pp. 5–13, 2020, doi: 10.31334/abiwara.v2i1.1050.
A. Mail, M. Asri, A. Padhi, T. A, and N. Chairany, “Pengendalian Persediaan Bahan Baku Menggunakan Metode Min-Max Stock di PT. Panca Usaha Palopo Plywood,” vol. 3, no. 1, pp. 9–14, 2018.
A. Vergianti, “Perencanaan Kebutuhan Persediaan Bahan Baku Pada Proses Body Repair Mobil Dengan Menggunakan Metode Min-Max,” p. 13, 2017.
A. P. Kinanthi, D. Herlina, and F. A. Mahardika, “Analisis Pengendalian Persediaan Bahan Baku Menggunakan Metode Min-Max (Studi Kasus PT.Djitoe Indonesia Tobacco),” PERFORMA Media Ilm. Tek. Ind., vol. 15, no. 2, pp. 87–92, 2016, doi: 10.20961/performa.15.2.9824.
A. P. A. Hansa, “Penerapan Metode Period Order Quantity (POQ) Pada Aplikasi Pendukung Optimalisasi Persediaan Bahan Baku Kain Di Ud.Dwidaku Jaya,” vol. 3, no. 3, pp. 69–70, 2015.
R. H. Hertanto, “Metode Min-Max Dan Penerapannya Sebagai Pengendali Persediaan Bahan Baku Pada PT. Balatif Malang,” J. Adm. dan Bisnis, vol. 14, no. 2, pp. 161–167, 2020.
R. Sholehah, M. Marsudi, and A. G. Budianto, “Analisis Persediaan Bahan Baku Kedelai Menggunakan Eoq, Rop Dan Safety Stock Produksi Tahu Berdasarkan Metode Forecasting Di Pt. Langgeng,” J. Ind. Eng. Oper. Manag., vol. 4, no. 2, 2021, doi: 10.31602/jieom.v4i2.5884.
D. T. K. Ningrum and Purnawan, “Evaluasi Pengendalian Persediaan Bahan Baku UPVC Dengan Perbandingan Metode EOQ, POQ, dan Min-Max Pada PT XYZ,” Ind. Eng. Online J., vol. 11, 2022.
D. D. Pangestu, B. Sumartono, and W. T. Bhirawa, “Analisis Peramalan Permintaan Produk Kipas Angin Dengan Metode Arima (Autogressive Integrated Moving Average) Untuk Menentukan Persediaan Safety Stock dan Service Level Pada PT. Catur Sukses Internasional,” J. Tek. Ind., vol. 8, p. 11, 2019.
C. Cahyani and W. Kartika, “Pengendalian Persediaan Minimum Dan Maksimum Untuk Maintenance, Repair Dan Operation Stock,” in Seminar Nasional Manajemen Industri dan Rantai Pasok, 2020, vol. 1, pp. 230–237.
Mahwan, “Penerapan Metode Reorder Point (ROP) dalam Persediaan Sabun Cuci Merk ‘B-Light’ pada UD. Dhofir Jaya di Desa Pemecutan Kaja Kecamatan Denpasar Utara,” J. Ilm. Akunt. dan Humanika, vol. 11, no. 2, pp. 119–205, 2021.
I. B. Alvianto, E. Budiasih, and A. Pamoso, “Analisis Penentuan Reorder Point Untuk Prediksi Dan Optimisasi Suku Cadang Pada Mesin X Di PT XYZ Menggunakan Metode Reliability Centered Spares (RCS) Dan Min Max Stock,” in e-Proceeding of Engineering, 2020, vol. 7, no. 2, pp. 5233–5241.
H. P. Nugroho, F. Tatas, and D. Atmaji, “Designing The Estimation of The Need for Spare Parts and Inventory Policy on The D32 CP8 Compressor Machine,” Infotekmesin, vol. 14, no. 01, pp. 68–76, 2023, doi: 10.35970/infotekmesin.v14i1.1482.
N. L. Rachmawati and M. Lentari, “Penerapan Metode Min-Max untuk Minimasi Stockout dan Overstock Persediaan Bahan Baku,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 8, no. 2, pp. 143–148, 2022, doi: 10.30656/intech.v8i2.4735.
A. Bakhtiar and S. Audina, “Analisis Pengendalian Persediaan Aux Raw Material Menggunakan Metode Min-Max Stock Di PT. Mitsubishi Chemical Indonesia,” J@ti Undip J. Tek. Ind., vol. 16, no. 3, pp. 161–168, 2021, doi: 10.14710/jati.16.3.161-168.
Copyright (c) 2023 Alyaa Sekar Khairunnisa, Braam Delfian Prihadianto
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
