Pengaruh Penambahan Arang Tempurung Kelapa Terhadap Kualitas Briket dari Arang Pelepah Nipah Menggunakan Tepung Tapioka Sebagai Perekat
Abstract views: 293
,
PDF downloads: 527
Abstract
Nipa Palm fronds is one of the biomass that has potential to be used as briquettes because it has high cellulose. The calorific value of nypa palm frond will cause low briquettes quality. The aims of this study is to determine the effect of the addition of coconut shell charcoal. The research method used was by mixing coconut shell charcoal with nipa palm charcoal with various compositions and using tapioca flour as an adhesive as much as 10% of the total weight of briquettes. It was found that the addition of coconut shell charcoal can improve the quality of briquettes according to SNI No.1/6235/2000 with the best composition ratio palm charcoal:coconut shell charcoal which is 20%:80%. Briquettes have a moisture content 2,43%, ash content 7,3%, a calorific value 6779,64 Kal/gram, density 1 gram/cm2 and a burning rate of 0,0393 gram/minute.
References
T. Dalming, H. A. Wardani, and U. A. Annisa, “p ISSN : 2775-8567 p ISSN : 2775-8567,” J. Farm. Pelamonia, vol. 2, no. 1, pp. 49–53, 2020.
S. Suryadi and H. Syafria, “Pengaruh Level Inokulum Jamur Tiram Putih Terhadap Kandungan Fraksi Serat Pelepah Nipah,” J. Peternak. Indones. (Indonesian J. Anim. Sci., vol. 24, no. 3, p. 298, 2022, doi: 10.25077/jpi.24.3.298-303.2022.
T. Zulfadli, M. Kafrawi, and M. Abd, “Optimalisasi Hasil Produksi Briket Cangkang Kelapa Dengan Memanfaatkan Teknologi Tepat Guna Berbahan Bakar Minyak Solar,” Infotekmesin, vol. 13, no. 2, pp. 335–340, 2022, doi: 10.35970/infotekmesin.v13i2.1550.
Mustafa, Firman, and M. . Syam, “Pembuatan Briket Dari Arang Pelepah Nipah Menggunakan Perekat Putih Telur Ayam Hybrid,” Maj. Tek. Ind., vol. 29, no. 2, pp. 14–21, 2022.
R. W. A. Jaswella, Sudding, and Ramdani, “Pengaruh Ukuran Partikel Terhadap Kualitas Briket Arang Tempurung Kelapa,” Chemica, vol. 23, no. 1, pp. 7–19, 2022.
N. Iskandar, S. Nugroho, and M. F. Feliyana, “Uji Kualitas Produk Briket Arang Tempurung Kelapa Berdasarkan Standar Mutu SNI,” Momentum, vol. 15, no. 2, 2019.
N. S. Harahap and E. Jumiati, “Analisis Sifat Fisika dan Kimia terhadap Pembuatan Briket Arang Limbah Biji Salak dengan Variasi Perekat Tepung Tapioka dan Tepung Sagu,” J. Fis. Unand, vol. 12, no. 1, pp. 115–123, 2022, doi: 10.25077/jfu.12.1.115-123.2023.
A. Sugiharto and Z. ‘Ilma Firdaus, “Pembuatan Briket Ampas Tebu Dan Sekam Padi Menggunakan Metode Pirolisis Sebagai Energi Alternatif,” J. Inov. Tek. Kim., vol. 6, no. 1, pp. 17–22, 2021, doi: 10.31942/inteka.v6i1.4449.
M. Masthura, “Analisis Fisis dan Laju Pembakaran Briket Bioarang Dari Bahan Pelepah Pisang,” Elkawnie, vol. 5, no. 1, p. 58, 2019, doi: 10.22373/ekw.v5i1.3621.
A. Sutikno et al., “Pembuatan Arang Briket Sebagai Bahan Bakar Alternatif Dalam Industri Pandai Besi,” J. Community Empower., vol. 2, no. 2, pp. 16–23, 2022.
A. D. Rinanda, W. Nuriana, and S. Sutrisno, “Pengaruh Variasi Tekanan Terhadap Kerapatan, Kadar Air Dan Laju Pembakaran Pada Biobriket Limbah Kayu Mahoni,” J. PILAR Teknol. J. Ilm. Ilmu Ilmu Tek., vol. 6, no. 1, pp. 21–24, 2021, doi: 10.33319/piltek.v6i1.67.
T. Evila, P. Sri, M. Nurhilal, and R. Dwityaningsih, “Analisis Proksimat dan Bilangan Yodium Sebagai Kajian Awal Aarang Tempurung Nipah Sebagai Bahan Intermediate Karbon Keras,” Rekayasa Hijau, vol. 6, no. November, pp. 248–260, 2022.
E. W. Kurniawan, M. Rahman, and R. K. Pemuda, “Studi Karakteristik Briket Tempurung Kelapa dengan Berbagai Jenis Perekat Briket,” Bul. Loupe, vol. 15, no. 01, pp. 31–37, 2019.
R. M. Saputra, J. Sumarjo, and I. N. Gusniar, “Pemanfaatan Limbah Pasca Panen Getah Karet dan Kayu Pohon Karet Sebagai Briket Arang Untuk Kemandirian Energi,” Media Bina Ilm., vol. 16, no. 11, pp. 7719–7726, 2022.
A. P. Gobel and A. T. Arief, “Pengaruh Karbonisasi Terhadap Karakteristik Tempurung Kelapa Berdasarkan Uji Proksimat Dan Nilai Kalor,” J. Miner. Energi, dan Lingkung., vol. 5, no. 1, p. 48, 2022, doi: 10.31315/jmel.v5i1.5370.
D. M. Kamal, “Penambahan Serbuk Ampas Kopi Sebagai Upaya Meningkatkan Nilai Kalor Briket Limbah Kertas,” J. Inov. Peelitian, vol. 2, no. 12, pp. 3913–3920, 2022.
A. P, A. Z. Syaiful, and M. Tang, “Pembuatan Briket Arang dari Tempurung Kelapa dengan Metode Pirolisis,” J. Saintis, vol. 1, no. 2, 2020, [Online]. Available: https://www.ejournalfakultasteknikunibos.id/index.php/saintis/article/download/130/44
F. Y. Sugiyati, B. Sutiya, and Y. -, “Karakteristik Briket Arang Campuran Arang Akasia Daun Kecil (Acacia auliculiformis) dan Arang Alaban (Vitex pubescens vhal),” J. Sylva Sci., vol. 4, no. 2, p. 274, 2021, doi: 10.20527/jss.v4i2.3337.
H. Anizar, E. Sribudiani, and S. Somadona, “Pengaruh Bahan Perekat Tapioka dan Sagu Terhadap Kualitas Briket Arang Kulit Buah Nipah,” Parennial, vol. 16, no. 1, pp. 11–17, 2020.
Copyright (c) 2023 Mohamad Arifin, Rosita Dwityaningsih, Taufan Ratri Harjanto
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
