Pengaruh Panjang Tabung dan Radius Fillet Terhadap Faktor Keamanan Tabung Motor Roket Dextrose Menggunakan Ansys Workbench

Lasinta Ari Nendra Wibawa, Unggul Satrio Yudhotomo, Yudi Haryanto, Rahadyan Lingga Laksita

Abstract


The rocket motor tube is the main component of the Dextrose rocket. This paper aims to investigate the effect of tube length and fillet radius on the safety factor of a dextrose rocket motor tube using Ansys Workbench. The Dextrose rocket tube uses Al 6063-T5 material with an outer diameter of 32 mm, a wall thickness of 3 mm, and internal pressure of 5 MPa. The rocket motor tube length is varied by 200, 250, 300, and 350 mm. The fillet radius uses variations of 3, 4, and 5 mm. The analysis was carried out using the finite element method with the help of Ansys Workbench. The simulation results show that the safety factor does not have a significant effect on changes in the length of the rocket tube. The safety factor increases as the fillet radius increases.


Keywords


ansys workbench; rocket tube length; fillet radius; dextrose rocket; rocket motor tube

Full Text:

PDF


DOI: https://doi.org/10.35970/infotekmesin.v12i2.609

Article metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Indexed by:

 
   

 

Editorial Office:

Pusat Penelitian dan Pengabdian Masyarakat (P3M)
Politeknik Negeri Cilacap
Jln. Dokter Soetomo No.1, Karangcengis Sidakaya Cilacap
Jawa Tengah 53212
Telepon: (0282) 533329
Email: infotekmesin.ejournal@pnc.ac.id

 

   Flag Counter

 

View My Stats

 

Creative Commons License
INFOTEKMESIN is licensed under a Creative Commons Attribution 4.0 International License.