RANCANG BANGUN DAPUR CRUCIBLE TIPE PENUANGAN TUNGKIK KAPASITAS 15 KG DENGAN BAHAN BAKAR GAS LPG

Ipung Kurniawan, Bayu Aji Girawan, Saeful Nurrohman

Abstract


This research aims to; 1) Designing and making aluminium melting crucible casting with the capacity
15 kg; 2) Conducting the test of chemical composition of the first and second melting result. The
research used field and library research. From the result of the design, it could be obtained that the
dimension of melting casting has 547 mm diameter, 3 mm thick, 410 mm high. Whereas, molten cup has 178 mm diameter, 8 mm thick, and 230 mm high. The result of the first melting chemical
composition test and the second one do not work out a significant change. The material of the first
melting result still contains 89,52% of aluminium (Al), while the main fusion is 7,71% of zinc (Zn)
and 1,84% of silicon (Si), and in the second melting result still contains 89,55% of Alumunium (Al),
while the main fusion is 7,51% of zinc (Zn) and 1,94% of silicon (Si).

Full Text:

PDF

References


Akuan, A., 2009. “Tungku Peleburan Logam”, Universitas Jendral Ahmad Yani, Bandung.

Sudjana, H., 2008, Teknik Pengecoran Logam, Departemen Pendidikan Nasional, Jakarta.

Hill, R., C., 1979, “Design, Construction and Performance of Stick-Wood Fire Furnace for Residental and Commercial Application” University of Maine Orono, Maine, pp. 1- 7.

Mubarak, A., Z., dan Akhyar, 2013,"Perancangan dan Pembuatan Dapur Peleburan Logam dengan Menggunakan Bahan Bakar Gas (LPG)" Jurnal Teknik Mesin Unsyiah, Vol.

, No. 3 Juni 2013 pp. 128-132.

Arianto, L.S. Dkk, 2014, “Tungku Pelebur Alumnium Dengan Economizer” Universitas Negeri Yogyakarta.

} John R. Brown,. 1994, Feseco Non-Ferrous Foundryman’s Handbook Eleventh edition Revised and edited.

Totten, George. E, 1999, Handbook of Aluminium, Vol. 1, Marcel Dekker, New York, Bassel.

Inayah Fatwa Kurnia Dewi, 2009, “Pemanfaatan Gas” Universitas Indonesia, Jakarta.

Darmawan, H, 2004. Pengantar PerancanganTeknik (Perancangan Produk). Bandung.

Suhandri E., 2011, “Rancang Bangun Dapur Peleburan Alumunium Bahan Bakar Gas”, Politeknik Negeri Sriwijaya, Palembang.




DOI: https://doi.org/10.35970/infotekmesin.v9i01.1

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Infotekmesin

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Indexed by:

 

Editorial Office:

Pusat Penelitian dan Pengabdian Masyarakat (P3M)
Politeknik Negeri Cilacap
Jln. Dokter Soetomo No.1, Karangcengis Sidakaya Cilacap
Jawa Tengah 53212
Telepon: (0282) 533329
Email: infotekmesin.ejournal@pnc.ac.id

 

   Flag Counter

 

View My Stats

 

Creative Commons License
INFOTEKMESIN is licensed under a Creative Commons Attribution 4.0 International License.