Analisis Pengaturan Inverter Terhadap Unjuk Kerja Mesin Planer Bambu V2 Dalam Menghasilkan Serutan Bambu Laminasi
Abstract views: 31
,
PDF downloads: 32
Abstract
Planer bamboo machine V2 is a machine used to flatten the top and bottom surfaces of bamboo slats. This machine was made to overcome problems with existing machines in the form and long times of drawstring. An inverter is added to set the rotational speed roller. This study analyzes the effect of a combination of the top and bottom cutting speeds on the rotation speed of roller whose rotation speed was set at frequencies of 10, 20, 30, 40, and 50 Hz. The purpose of the study is to determine the effect of inverter frequency settings on the results of bamboo drawstring. Based on the analysis performed, the appropriate combination for the performance planer bamboo machine is by setting the inverter frequency to 20 Hz with a production result in a day of 54,54 slats drawstring with long of slats 2 meters, with a total power consumption of 2,483 kWh in one hour.
References
A. Priyanto and I. Yasin, “Pemanfaatan Laminasi Bambu Petung Untuk Bahan Bangunan,” Sci. Tech J. Ilmu Pengetah. dan Teknol., vol. 5, no. 2, pp. 23–39, 2019, doi: 10.30738/jst.v5i2.5803.
B. I. Besari, “Perancangan Mekanisme Mesin Planer Laminasi Bambu,” Universitas Gadjah Mada, 2019.
R. O. Hidayat and Mukhnizar, “Perencanaan Mesin Serut Bambu Kapasitas 500 Batang/Jam,” J. Sci. Res. Dev., vol. 4, no. 2, pp. 159–170, 2022, [Online]. Available: http://idm.or.id/JSCR
J. S. Chapman, Electric Machinery and Power System Fundamental, 2nd ed. New York: McGraw-Hill, 1991.
Atmam, A. Tanjung, and Zulfahri, “Analisis Penggunaan Energi Listrik Motor Induksi Tiga Phasa Menggunakan Variable Speed Drive (VSD),” SainETIn, vol. 2, no. 2, pp. 52–59, 2018, doi: 10.31849/sainetin.v2i2.1218.
N. Evalina, A. Azis, and Zulfikar, “Pengaturan Kecepatan Putaran Motor Induksi 3 Fasa Menggunakan Programmable logic controller,” J. Electr. Technol., vol. Vol. 3, No, no. 2, 2018, [Online]. Available: https://jurnal.uisu.ac.id/index.php/jet/article/view/545%0Ahttps://jurnal.uisu.ac.id/index.php/jet/article/view/545/478
D. H. Prastiko and A. Supardi, “Pengendali dan Monitoring Kecepatan Putar Motor Induksi 3 Fasa Berbasis Programmable Logic Controller dan Expansion dengan Human Machine Interface,” Emit. J. Tek. Elektro, vol. 22, no. 2, pp. 168–176, 2022, doi: 10.23917/emitor.v22i2.19110.
S. A. Dhewanto, “Perancangan mekanisme penggerak pada mesin pembilah bambu sebagai pendukung kinerja usaha kecil dan menengah,” Teknoin, vol. 22, no. 10, pp. 764–775, 2016.
R. Choerul, W. Ramadhani, L. Fauziyah, and L. Kiswari, “Pengaruh Penggunaan Gearbox pada Mesin Peningkat Produktivitas Sale Pisang dengan Metode Translation Pressed Screw,” J. Mech. Eng., vol. 5, no. 2, pp. 55–59, 2021.
Meryanalinda, Wardjito, and W. D. Putra, “Perancangan Gearbox Penarik Kapal Sistem Airbag Kapasitas 7000 Ton,” vol. 08, 2019.
E. S. Nasution and A. Hasibuan, “Pengaturan Kecepatan Motor Induksi 3 Phasa Dengan Merubah Frekuensi Menggunakan Inverter ALTIVAR 12P,” Sisfo J. Ilm. Sist. Inf., vol. 2, no. 1, pp. 25–34, 2018, doi: 10.29103/sisfo.v2i1.1001.
I. P. A. Putra Novantara, I. W. Arta Wijaya, and I. M. Suartika, “Analisis Pengaturan Putaran Motor Induksi 3 Fasa Dengan Mengatur Frekuensi Menggunakan Variable Speed Drive Di Pt Pdam Tirta Mangutama Kabupaten Badung,” J. SPEKTRUM, vol. 8, no. 4, p. 103, 2022, doi: 10.24843/spektrum.2021.v08.i04.p12.
B. P. Hartono and E. Nurcahyo, “Analisis Hemat Energi Pada Inverter Sebagai Pengatur Kecepatan Motor Induksi 3 Fasa,” Elektrika, vol. 1, no. no.1, pp. 1–9, 2017, [Online]. Available:https://ejournal.itn.ac.id/index.php/elektrika
Y. Pranata, T. Arfianto, and N. Taryana, “Analisis Unjuk Kerja Motor Induksi 3 Fasa Menggunakan Inverter 3 Fasa,” TELKA - Telekomun. Elektron. Komputasi dan Kontrol, vol. 4, no. 2, pp. 91–102, 2018, doi: 10.15575/telka.v4n2.91-102.
M. I. Kido and U. Ridhani, “Rancang Bangun Mesin Pengirat dan Penyerut Tusuk Sate,” J. Tambora, vol. 6, no. 1, pp. 25–29, 2022.
Giancolli, Fisika Jilid 1 (Terjemahan). Jakarta: Erlangga, 2001.
Copyright (c) 2024 Silvano Virgio Prasta Prasta, Ignatius Aris Hendaryanto, Budi Basuki, Radhian Krisnaputra, Sugiyanto, Inggar Septhia Irawati
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
