Perancangan Skema Dual Port Injection Sistem Electric Control Unit Motor Spark Ignition
Abstract views: 98
,
PDF downloads: 100
Abstract
Blending fuels is an urgent alternative to reduce dependence on gasoline. Blending gasoline-alcohol bioethanol is realistic due to its high octane number properties and the abundant availability of raw materials. However, high viscosity results in inconsistent fuel mixing homogenization and decreased injector performance. The research aims to design a Dual Port Injection scheme as a dummy simulation of fuel blending so that bioethanol alcohol can be homogeneously blended with gasoline in the combustion chamber. The method used is observation of the Electric Fuel Injection working system and designing a Dual Port Injection Scheme. The research resulted in a Dual Port Injection scheme with the concept of doubling the injection-based fuel system and commands from the commercial Electric Control Unit to be forwarded to the bioethanol and bioethanol fuel pumps to supply fuel to the high pressure pipe.
References
M. Amine and Y. Barakat, “Effect of cyclohexanol on phase stability and volatility behavior of hydrous ethanol-gasoline blends,” Egypt. J. Pet., vol. 30, no. 3, pp. 7–12, 2021, doi: 10.1016/j.ejpe.2021.04.001.
M. T. Q. S. Syarifufdin, E. Yohana, M. Muchammad, S. Suhartana, F. Fatkhurrozak, F. L. Sanjaya, “Korelasi Konsentrasi Etanol 5 % Pada Bahan Bakar Gasolin Terhadap Performa , dan Emisi Gas Buang Mesin Bensin 150cc,” vol. 14, no. 01, pp. 149–154, 2023, doi: 10.35970/infotekmesin.v14i1.1737.
Gaikindo, “Hasil Sensus BPS: Jumlah Kendaraan Bermotor di Indonesia Tembus 133 Juta Unit,” Gaikindo, 2019. https://www.gaikindo.or.id/data-bps-jumlah-kendaraan-bermotor-di-indonesia-tembus-133-juta-unit/
Nabila Nur Hana Putri, “Analis Ingatkan Dampak Konflik Israel-Palestina ke Harga Minyak,” Katadata.com, 2023. https://katadata.co.id/hariwidowati/finansial/652e5540a90bf/analis-ingatkan-dampak-konflik-israel-palestina-ke-harga-minyak
VOA, “OECD: Ekonomi Global 2024 Melamban Akibat Inflasi dan Perang,” voaindonesia.com, 2023. https://www.voaindonesia.com/a/oecd-ekonomi-global-2024-melamban-akibat-inflasi-dan-perang/7377391.html
R. A. Y. L. Calvin, P. A. T. Hariyanto, A. I. Usman, M. Masuku, C. S. Wibowo, M. Maymuchar and B. S. N. A. Fathurrahman, “Volatility and physicochemical properties of gasoline-ethanol blends with gasoline RON-based 88, 90, and 92,” Fuel, vol. 307, no. August 2021, p. 121850, 2022, doi: 10.1016/j.fuel.2021.121850.
S. Syarifudin and and H. K. F. L. Sanjaya, F. Fatkhurrozak, M. K. Usman, Y. Sibagariang, “Effect methanol, ethanol, Butanol on the emissions characteristics of gasoline engine,” Automot. Exp., vol. 4, no. 2, pp. 62–67, 2021, doi: 10.31603/ae.4641.
F. L. Sanjaya and N. Sinaga, “Effect of Premium-Butanol Blends on Fuel Consumption and Emissions on Gasoline Engine with Cold EGR System Effect of Premium - Butanol Blends on Fuel Co n sumption and Emissions on Gasoline Engine with Cold EGR System,” pp. 11–17, 2019, doi: 10.1088/1742-6596/1373/1/012019.
T. Sugiarto, D. S. Putra, W. Purwanto, and W. Wagino, “Analisis Perubahan Output Sensor Terhadap Kerja Aktuator pada Sistem EFI (Electronic Fuel Injection),” INVOTEK J. Inov. Vokasional dan Teknol., vol. 18, no. 2, pp. 91–100, 2018, doi: 10.24036/invotek.v18i2.418.
Y. j. L. Rizky Kiky Adriaansz, “Analisis Perbandingan Penyemprotan Injektor Ymjet-fi,” J. Voering, vol. 6, no. 2, pp. 72–80, 2021.
C. N. Nasuha, A. A. Nursalim, and M. Haerudin, “Pengaruh pengunaan ecu standar dan ecu racing brt terhadap unjuk kerja motor vixion 2019,” J. Fak. Tek. Unisa kuningan, vol. 3, no. 3, pp. 71–76, 2022.
A. D. Soewono, M. Darmawan, and J. Halim, “Kajian Eksperimental Pengaruh Penggunaan Electronic Control Unit Aftermarket Pada Daya, Torsi, Emisi Dan Konsumsi Bahan Bakar Sepeda Motor 150Cc,” J. Rekayasa Mesin, vol. 14, no. 2, pp. 487–497, 2023, doi: 10.21776/jrm.v14i2.1276.
M. M. Al Fikri, T. Mesin, F. Teknik, and U. Islam, “Majapahit Mechanical Enginering Analisa Sistem Kerja Electrical Fuel Injection ( Efi ) Pada Motor Honda Cbr 150,” pp. 1–10, 2018.
and B. C. P. B. Waluyo, “Exhaust Gas Emissions of Homogeneous Gasoline-Methanol-(Ethanol) Blends,” Automot. Exp., vol. 5, no. 2, pp. 173–181, 2022, doi: 10.31603/ae.6599.
S. Munahar and M. Setiyo, “Pemodelan AFR pada Mesin EFI dengan Kontrol Dinamika Mesin, Kecepatan Kendaraan, dan Sistem Transmisi AFR Modeling of EFI Engine Based on Engine Dynamics, Vehicle Dynamics, and Transmission System,” vol. 7, no. 1, p. p-ISSN, 2017, [Online]. Available: https://e-journal.itp.ac.id/index.php/jtm
A. Verma, N. S. Dugala, and S. Singh, “Experimental investigations on the performance of SI engine with Ethanol-Premium gasoline blends,” in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 1224–1231. doi: 10.1016/j.matpr.2021.08.255.
X. Yu et al., “Experimental study on the effects of EGR on combustion and emission of an SI engine with gasoline port injection plus ethanol direct injection,” Fuel, vol. 305, no. July, p. 121421, 2021, doi: 10.1016/j.fuel.2021.121421.
K. Winangun et al., “Penggunaan bahan bakar terbarukan (biodiesel-hidrogen) pada mesin diesel dual fuel untuk mendukung energy transition di Indonesia,” J. Progr. Stud. Tek. Mesin UM Metro, vol. 12, no. 1, pp. 1–8, 2023.
F. L. Sanjaya, M. K. Usman, F. Fatkhurrozak, S. Syarifudin, and A. B. Hendrawan, “Efek Pencampuran Butanol dan Diethyl Ether (DEE) Pada Pertalite Terhadap Torsi, Daya dan Brake Spesific Fuel Consumpsion Mesin Bensin 160cc,” Infotekmesin, vol. 14, no. 2, pp. 280–284, 2023, doi: 10.35970/infotekmesin.v14i2.1906.
M. K. Mohammed, H. H. Balla, Z. M. H. Al-Dulaimi, Z. S. Kareem, and M. S. Al-Zuhairy, “Effect of ethanol-gasoline blends on SI engine performance and emissions,” Case Stud. Therm. Eng., vol. 25, no. May 2020, p. 100891, 2021, doi: 10.1016/j.csite.2021.100891.
F. B. Ismail, A. Al-Bazi, and I. G. Aboubakr, “Numerical investigations on the performance and emissions of a turbocharged engine using an ethanol-gasoline blend,” Case Stud. Therm. Eng., vol. 39, no. April, p. 102366, 2022, doi: 10.1016/j.csite.2022.102366.
M. Amirabedi, S. Jafarmadar, and S. Khalilarya, “Experimental investigation the effect of Mn2O3 nanoparticle on the performance and emission of SI gasoline fueled with mixture of ethanol and gasoline,” Appl. Therm. Eng., vol. 149, pp. 512–519, Feb. 2019, doi: 10.1016/j.applthermaleng.2018.12.058.
F. Fatkhurrozak, F. L. Sanjaya, E. Yohana, J. Prof, S. No, and K. Semarang, “Karakteristik Emisi CO dan HC Mesin bensin SOHC 110cc Berbahan bakar Pertalite-Alkohol,” vol. 13, no. 01, pp. 189–193, 2022, doi: 10.35970/infotekmesin.v13i1.1067.
R. Anggarani, C. S. Wibowo, and B. Sugiarto, “Concentrations of Gasoline-Ethanol-Methanol ( GEM ),” vol. 6, no. 2, pp. 407–415, 2023.
Motogokil, “Mesin New Vixion Lightning 1PA, Sesuatu,” Motogokil, 2014. https://motogokil.com/2014/03/30/mesin-new-vixion-lightning-1pa-sesuatu/
R. Panjaitan, “Metodologi Penelitian: Metodologi penelitian Skripsi,” Rake Sar., vol. 2, no. 01, p. 51, 2017.
S. Dwi Ikhwanudin and J. Teknik Mesin, “PENGARUH PENGGUNAAN ENGINE CONROL UNIT(ECU) UNLIMITER TERHADAP ENGINE MOTOR YAMAHA V-IXION 150CC I Made Arsana”.
N. Lestari, “Analisa Variasi Arus Pengelasan Ss 304 Menggunakan Shielded Metal Arc Welding (Smaw) Terhadap Kekuatan Mekanisnya,” Otopro, vol. 16, no. 1, p. 18, 2020, doi: 10.26740/otopro.v16n1.p18-22.
A. Aryadi, “Kajian Eksperimental Pengaruh Variasi Tekanan Electric Fuel Pump Terhadap Daya, Torsi Mesin, Emisi Gas Buang Dan Konsumsi Bahan Bakar Sepeda Motor Injeksi,” Teknobiz J. Ilm. Progr. Stud. Magister Tek. Mesin, vol. 10, no. 3, pp. 55–60, 2020, doi: 10.35814/teknobiz.v10i3.1764.
M. V. Hermawan and A. E. Winarta, “Studi Eksperimen Pengaruh Jumlah Lubang Nosel Injektor Terhadap Performa Mesin Sepeda Motor,” J. Tek. Atw, no. 23, pp. 77–84, 2020.
Ihai, “No Title,” Ihaisp.com, 2022. https://www.ihaisp.com/2022/09/sistem-fi-yamaha.html
F. Fatkhurrozak, F. L. Sanjaya, S. Syarifudin, A. B. Hendrawan, M. K. Usman, and G. Gunawan, “Pengaruh Penambahan methanol Terhadap Emisi Bahan Bakar Mesin Sepeda Motor Berbahan Bakar Pertamax 150 CC,” Infotekmesin, vol. 14, no. 2, pp. 189–193, 2023, doi: 10.35970/infotekmesin.v14i2.1719.
Copyright (c) 2024 Syarifudin, Kusnadi, Faqih Fatkhurrozak, Firman Lukman Sanjaya
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
