Penerapan Metode Quality Function Deployment Dalam Rancang Bangun Gearbox Mesin Panen Kelapa Sawit Bermotor Untuk Industri Pekebunan Sawit
Abstract views: 0
,
Abstract
In the oil palm plantation industry, several motorized palm oil harvesting equipment already exist in the palm oil industry market. Several motorized palm harvesting equipment, such as STIHL PC 70 and Tanika TS-5, are on the market. These two machines are rarely used because the tool's price is still high compared to the manual method. One part that makes both tools expensive is the gearbox. In addition, this part is the most often damaged so it requires a long repair time and increases the time to harvest oil palm. This research aims to design a gearbox for oil palm harvesting equipment that is low-cost, lightweight, and tough. The Quality Function Deployment (QFD) method was chosen to prototype the palm oil harvesting gearbox. The results of this research obtained a prototype gearbox that is lightweight and has a tough mechanical system. In addition to its manufacture, which is carried out independently and using local materials, the production cost of the gearbox is low, even when it is still in prototype form.
References
[2] E. D. Daryono and L. J. R. M. Mustiadi, "PRODUKSI BIODIESEL DARI MINYAK KELAPA SAWIT DENGAN CO-SOLVENT FAME (FATTY ACID METHYL ESTERS) DAN APLIKASINYA PADA MOTOR BAKAR," vol. 13, no. 2, 2022.
[3] S. Sabiham and B. J. J. H. Pramudya, "Analisis lingkungan biofisik lahan gambut pada perkebunan kelapa sawit," 2010.
[4] A. R. Jelani, M. I. H. Azaman, and M. R. J. J. o. O. P. R. Ahmad, "The effect of vibration isolator on the magnitude of hand-arm vibration (HAV) of the oil palm motorised cutter (CANTAS)," vol. 31, no. 1, pp. 86-94, 2019.
[5] A. R. Jelani et al., "Development and evaluation of a new generation oil palm motorised cutter," vol. 30, no. 2, pp. 276-288, 2018.
[6] O. A. Nugroho, A. R. K. Widhi, and S. J. J. P. K. S. Kumbarasari, "Rancang Bangun Alat Panen Portabel Sawit Bermotor Menggunakan Flexible Shaft," vol. 30, no. 2, pp. 83-94, 2022.
[7] Y. S. J. R. M. Yunaidi, "Perbaikan Sifat Mekanik Dodos Kelapa Sawit Produk Lokal Melalui Proses Pack Carburizing Dan Modified Martempering_," vol. 13, no. 3, pp. 847-856, 2022.
[8] F. K. Gündoğdu and C. J. E. A. o. A. I. Kahraman, "A novel spherical fuzzy QFD method and its application to the linear delta robot technology development," vol. 87, p. 103348, 2020.
[9] L. Rihar and J. J. S. Kušar, "Implementing concurrent engineering and QFD method to achieve realization of sustainable project," vol. 13, no. 3, p. 1091, 2021.
[10] R. Ginting, A. Ishak, A. F. Malik, and M. R. Satrio, "Product development with quality function deployment (QFD): a literature review," in IOP Conference Series: Materials Science and Engineering, 2020, vol. 1003, no. 1, p. 012022: IOP Publishing.
[11] J. El Mesbahi, I. Buj-Corral, and A. J. T. I. J. o. A. M. T. El Mesbahi, "Design of an innovative new extrusion system for a printing machine for ceramics," vol. 117, pp. 591-603, 2021.
[12] P. A. Suryantara, K. R. Dantes, and I. N. P. J. J. P. T. M. U. Nugraha, "Rancang Bangun Mesin Vertical Screw Molding Dengan Penggerak Dinamo Starter Sebagai Pencair Limbah Plastik," vol. 8, no. 1, pp. 9-19, 2020.
[13] P. A. Suryantara, K. R. Dantes, and I. P. J. s. Nugraha, "Rancang Bangun Mesin Vertical Screw Molding Dengan Penggerak Dinamo Starter Sebagai Pencair Limbah Plastik Vertical Screw Molding Machine Design Plan With Dinamo Starter As A Diluent Plastic Waste," vol. 8, no. 1, 2020.
[14] J. Terninko, Step-by-step QFD: customer-driven product design. Crc Press, 1997.
[15] J. R. Hauser, A. Griffin, R. L. Klein, G. M. Katz, and S. P. J. W. I. E. o. M.
Copyright (c) 2025 Andreas Reky Kurnia Widhi, Oktavianus Ardhian Nugroho, Shanti Kumbarasari
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
